Metrohm 766 IC Sample Processor - Manual (Page 12)

1.4 Support documentation
766 IC Sample Processor
7
1.4 Support documentation
1.4.1 Application Bulletins
The «Application Bulletin» is a collection of analytical methods, applica-
tion examples and literature references. Of Metrohm's approximately
200 Application Bulletins, 34 currently refer to ion chromatography. All
these Application Bulletins are available on request free of charge from
your Metrohm supplier.
You will find an updated list of the Application Bulletins at any time un-
der «http://www.metrohm.ch».
1.4.2 Application Notes
The «Application Notes» present application information in concen-
trated form, i.e. on maximum 2 pages. There are currently 88 Applica-
tion Notes (in English) in the field of ion chromatography. You can order
these free of charge from your Metrohm supplier or view them in the
Internet under «http://www.metrohm.ch» and copy them from there.
1.5 Safety notes
1.5.1 Electrical safety
While electrical safety in the handling of the 766 IC Sample Processor is
assured in the context of the specifications IEC 1010-1 (protection class
1, degree of protection IP40), the following points should be noted:
• Mains connection
Set the mains voltage and check the mains fuse and mains
connection in accordance with the instructions in section 2.2.
• Opening the 766 IC Sample Processor
To avoid all danger of coming into contact with live components do
not open the instrument or remove any parts when the 766 IC Sample
Processor is connected to the power supply. Always disconnect the
instrument from all voltage sources before you open it and ensure that
the mains cable is disconnected from mains connection 25 25 !