Rockwell Automation 20D PowerFlex 700S AC Drives with Phase II Control Reference Manual - Manual (Page 188)

188 Rockwell Automation Publication PFLEX-RM003E-EN-E - January 2011
Chapter 1 Detailed Drive Operation
Master PowerFlex 700S Drive Setup (Transmitting Drive)
1. In the master, or transmitting drive, select the desired transmittal format in
the Transmit Format field. For this example, select “4 Direct Words, 8
Buffered Words.”
2. Below the Transmit Format field, for Direct Word 0, do the following:
a. Click the arrow next to the Type field and select “Parameter.”
b. Click the button to the right of the Source field and select 43
“Ramped Spd Ref.” This setting is to transmit the ramped speed from
the master.