Rockwell Automation 1772-LP3 PLC - 2/30 Programmable Controller Programming and Operations Manual - Manual (Page 2)

Because of the variety of uses for this equipment and because of the
differences between this solid state equipment and electromechanical
equipment, the user of and those responsible for applying this equipment
must satisfy themselves as to the acceptability of each application and
use of the equipment. In no event will Allen-Bradley Company, Inc. be
responsible or liable for indirect or consequential damages resulting from
the use or application of this equipment.
The illustrations, charts, and layout examples shown in this manual are
intended solely to illustrate the text of this manual. Because of the many
variables and requirements associated with any particular installation,
Allen-Bradley Company, Inc. cannot assume responsibility or liability for
actual use based upon the illustrative uses and applications.
No patent liability is assumed by Allen-Bradley Company, Inc. with
respect to use of information, circuits, equipment or software described in
this text.
Reproduction of the contents of this manual, in whole or in part, without
written permission of the Allen-Bradley Company, Inc. is prohibited.

1988 Allen-Bradley Company, Inc.
PLC is a registered trademark of Allen-Bradley Company, Inc.
WARNING: Warnings tell readers where people may be hurt if
procedures are not followed properly.
CAUTION: Cautions tell them where machinery may be
damaged or economic loss can occur if procedures are not
followed properly.
A Warning or Caution alerts you to:
a possible trouble spot
what causes the trouble to occur
the result of an improper action
how to avoid the situation
Important User Information