RKI Instruments GX-2012 Manual - Manual (Page 62)

54 • Display Mode GX-2012 Operator’s Manual
3. If snap logs have been performed, the following screen will appear.
This screen indicates the year, month, day, and time that the most recent
snap log was taken. The number along the bottom of the screen indicates
the snap log ID number. The first snap log that is taken is given an ID of
M001. The next snap log ID is M002. The ID number increases
sequentially with each set of snap log data. Use the AIRS and
(SHIFT)T buttons to scroll through different snap log IDs and view what
time they were taken.
4. To view the data in a snap log ID, press and release the POWER ENTER
button.
The gas readings that were taken during the snap log are displayed and
the Station ID that was in use during the snap log is displayed along the
bottom of the screen. You can use the AIRS and (SHIFT)T buttons to
scroll through the different snap logs. The gas readings and station ID
will change but the snap log ID is not visible from this screen. To scroll
through the data by viewing the snap log ID number, press and release
POWER ENTER.
2011
8
31
22:39
M023
50
23.5
50
30.0
%LEL
%
ppm
ppm
CH
4
O
2
001
CO
H
2
S