RKI Instruments GX-2012 Manual - Manual (Page 57)

GX-2012 Operator’s Manual Display Mode • 49
Clear Data Logger Screens
CAUTION: Once you clear the data logger, you cannot retrieve any data
previously stored in the data logger.
NOTE: This item appears in Display Mode only if the DLOG DSP menu
item in Maintenance Mode is turned ON. The factory setting for
DLOG DSP is ON.
The clear data logger screens allow you to clear the data logger storage. You
can set the GX-2012 to overwrite the oldest data when the data log is full. See
“Updating the Datalog Overwrite Setting” on page 129. The bottom line of
the screen alternates between LG CLEAR, NO /DISP, and YES/ENT.
To clear the data log:
1. With the above screen displayed, press and release the POWER ENTER
button. The instrument will ask you to confirm that you want to clear the
data log and CLr LOG will be flashing. The bottom line of the screen
alternates between CONFIRM?, YES/ENT., AND NO /DISP.
2. To cancel the clear data log and return to the Clear Data Logger Screen in
Display Mode, press and release DISPLAY (ADJ).
To continue with the clear data log, press and release POWER ENTER.
CLr
LG CLEAR
LOG
CLr
CONFIRM?
LOG