RKI Instruments GX-2012 Manual - Manual (Page 157)

GX-2012 Operator’s Manual Replacing or Recharging the Batteries • 149
If using a DC powered charging station, plug the 12 VDC vehicle plug
adapter into a vehicle’s 12 VDC power socket.
Figure 21: Connecting the Charging Station’s DC Adapter
The construction of the charging stations allows them to be chained
together but a separate adapter must be used for each charging station.
One adapter will not operate more than one charging station.
4. Place the GX-2012 into the battery charging station as shown in Figure
22 below so that the metal contacts on the back of the unit come into
contact with the metal contacts on the back of the holder in the charging
station. When proper contact has been made, the red LED on the charging
station will turn on.
If you are using a DC adapter, the charging station comes with a velcro
strap to secure the GX-2012. Ensure that both ends of the velcro strap are
attached to the charging station and that it is securing the instrument.
To Vehicle
12 VDC
Power Socket
DC Adapter
Charge LED
DC Powered Charging Station
Power Supply Jack