RKI Instruments GX-2012 Manual - Manual (Page 58)

50 • Display Mode GX-2012 Operator’s Manual
3. The GX-2012 displays 4 dashes and as the GX-2012 clears the data, the
dashes disappear. When the last dash is gone, the GX-2012 has been
cleared and the remaining log time value is reset.
Pump OFF Screen
WARNING: The GX-2012 is not a gas monitoring device while the pump
is off.
NOTE: This item appears in Display Mode only if the POFF DSP menu
item in Maintenance Mode is turned ON. The factory setting for
POFF DSP is OFF.
The GX-2012 pump can be turned on and off in this screen. The bottom line
of this screen alternates between PUMP OFF, NO /DISP, and YES/ENT.
This feature can be used to conserve battery life if there is a significant period
of time until the next gas monitoring task, but you do not want to wait for the
warmup sequence to complete if you turn the instrument off and on again.
In this screen, press POWER ENTER to turn the pump off. The fan in the
upper right corner of the screen will disappear. Once the pump is off, you
cannot exit this screen and return to normal operation or continue in Display
Mode until you turn the pump back on. To turn the pump back on and
continue in Display Mode or return to Normal Operation, press the POWER
ENTER button again.
LG CLEAR
- - - -
On
PUMP OFF