RKI Instruments GX-2012 Manual - Manual (Page 140)

132 • Using Maintenance Mode GX-2012 Operator’s Manual
1. Use the AIRS or (SHIFT)T buttons to display the C--CHECK menu
item. Press and release the POWER ENTER button. The screen will
indicate the current setting.
2. Use the AIRS or (SHIFT)T button to display the desired setting.
3. Press and release the POWER ENTER button to save the setting and
return to the main menu.
Updating the Bump Test Interval
This BP INTVL setting defines the amount of time between bump tests. The
minimum setting is 0 days and the maximum setting is 30 days. The factory
setting is 30 days.
NOTE: If the BUMP DSP menu item is set to OFF, this menu item does not
appear.
1. Use the AIRS or (SHIFT)T buttons to display the BP INTVL menu
item. Press and release the POWER ENTER button. The screen indicates
the current setting.
2. Use the AIRS or (SHIFT)T button to display the desired setting.
Tip: Press and hold the AIRS or (SHIFT)T button to rapidly scroll
through the settings.
3. Press and release the POWER ENTER button to save the setting and
return to the main menu.
4GAS
MAINTENANCE
C--CHECK
30
MAINTENANCE
BP INTVL