RKI Instruments GX-2012 Manual - Manual (Page 158)

150 • Replacing or Recharging the Batteries GX-2012 Operator’s Manual
Figure 22: Putting the GX-2012 into the Charging Station
5. When a full charge has been reached, approximately 4 hours, the red
LED on the charging station will turn off. Remove the GX-2012 from the
charging station and unplug the charging station’s power cord from the
AC outlet.
Recharging the Lithium Ion Battery Pack Out of the
Instrument
The lithium ion battery pack may be charged using the charging station while
it is out of the GX-2012. This is useful if spare battery packs are kept in case
the pack in the GX-2012 needs to be charged, but the unit must be used
immediately. In this case, a spare charged pack can be installed in the GX-
2012 and the dead pack charged in the charging station.
1. Make sure the GX-2012 is off.
2. Confirm that the adapter’s DC output cord is plugged into the charger. If
a multi-instrument charging station is being used, the same AC adapter is
used as for the single instrument charging station.
Red Charging LED