ETC Ion - Manual (Page 53)

2
System Basics 37
Indicators in the Playback Status Display
Color indicators
• Gold . . . . . . . . . . . . . . . .Any item (cue, list, page) highlighted in gold indicates
“current”.
Outlined in gold indicates “selected”.
• Red. . . . . . . . . . . . . . . . .Cue fade is in progress (cue list area)
Text indicators
• + (see cue 6) . . . . . . . . .Indicates that there is discrete timing within the associated
cue. Found in the cue display “Timing” area.
• * (see cue 4) . . . . . . . . . .Indicates the cue has an allfade command. Found in the cue
display “Flags” area.
• - . . . . . . . . . . . . . . . . . . .Indicates a dark move, a cue that has any non-intensity
parameters moving on channels whose intensity is at 0.
• x . . . . . . . . . . . . . . . . . . .Indicates that a mark has been placed, but the mark is
broken.
• A or a (see cues 3&4). . .Indicates an asserted cue. “A” indicates the entire cue is
asserted. “a” indicates a channel or parameter assert only.
Found in the cue display “Flags” area.
• B or b (see cue 2&5) . . .Indicates a blocked cue. “B” indicates the entire cue is
blocked. “b” indicates a channel/parameter block only. Found
in the cue display “Flags” area.
• D. . . . . . . . . . . . . . . . . . .AutoMark is disabled.
Indicates the timing for a
category.
Indicates that timing has
been applied but there is
no move instruction.
If blank, default time is
used and there is no move
instruction
Sneak Counter