Text indicators in live/blind – ETC Ion User Manual
Page 49
2
System Basics
33
Text Indicators in live/blind
Please note examples of text indicators in the following graphic:
Color conventions listed above apply to text indicators as well. Therefore red indicates a manual
value that must be stored.
Color conventions listed above apply to text indicators as well. Therefore red indicates a manual
value that must be stored.
•
_ . . . . . . . . . . . . . . . . . . .Underlined value (white) indicates a system-applied block
(also called an auto-block).
•
A. . . . . . . . . . . . . . . . . . .Indicates the channel or parameter is asserted.
•
B. . . . . . . . . . . . . . . . . . .Indicates the channel or parameter is manually blocked. This
block must be stored.
•
C. . . . . . . . . . . . . . . . . . .Captured Channel
•
I . . . . . . . . . . . . . . . . . . .Channel is controlled by an inhibitive submaster or
grandmaster. When displayed in the Block flag, “I” indicates
a cue level intensity block.
•
IP, CP, FP, BP . . . . . . . .Indicates that the value is referenced to a palette (Intensity,
Color, Focus, or Beam). This text is followed by a number,
indicating which palette is being referenced. This can be
substituted with the palette label if the “Show Reference
Label” setting is activated (see
). Holding down [Shift] & [Label] will toggle between the
palette label and palette number.
“B”
“N”
“_” (underscore)
“t”
“A”
“+”
“R”
“CP2”
“Q 10/4”
“C”
“I”
“Ph”
“P”
“MK”
“Pr”
“M”