Detaching devices, Clearing the patch, Reset patch – ETC Ion User Manual
Page 103
4
Patch
87
• Yellow “?” means that the dimmer/ device has a warning message.Warning messages can
include:
•
Multiple devices’ addresses overlap
•
Multiple devices of different devices at this address
•
Patched fixture type mismatch
•
Patched fixture address mismatch
•
Offline
Detaching Devices
Pressing {Attach} twice will post the {Detach} command.
that channel/address and the device at that address.
Clearing the Patch
You can clear the patch entirely by accessing the clear functions from the browser. Select {Clear}
from the main browser menu. The clear functions window will open in the CIA.
To clear the patch, click {Clear Patch}. A confirmation is required before the patch will be cleared.
To exit the clear functions screen without clearing, press the [Displays] key at any time or select a
clear button and then select {Cancel} from the confirmation screen.
Reset Patch
You can use {Reset Patch} to clear out your patch, and set it to a 1-to-1 patch.