ETC Ion - Manual (Page 212)

196 Ion Operations Manual
Mark Symbols
The symbols that appear in the Mark flag include:
Live
• MK . . . . . . . . . . . . . . Indicates the channel is marked for a later cue. The cue number
is indicated in the other categories (see “Q” below).
• Q. . . . . . . . . . . . . . . . Found in the non-intensity categories of a marked channel. The
“Q” is followed by a number indicating which cue the mark is in
preparation for.
• M . . . . . . . . . . . . . . . Indicates a mark is placed, but manual, and must be stored. Is
blue when stored.”m” indicates cue is not marking.
Playback Status Display
• D. . . . . . . . . . . . . . . . AutoMark is disabled.
• M or m . . . . . . . . . . . Indicates a marked cue. “M” indicates an AutoMark or a
reference mark that is used by a subsequent cue. “m” indicates
a reference mark that is currently unused by any subsequent
cue. Found in the “Flags” area.
• R . . . . . . . . . . . . . . . Indicates the source cue which refers back to an earlier mark.
Found in the cue display “Flags” area.
• + . . . . . . . . . . . . . . . . Indicates a cue is both a marking and reference cue when
displayed in the mark flag.
• - . . . . . . . . . . . . . . . . Indicates a dark move, a cue that has any non-intensity
parameters moving on channels whose intensity is at 0.
• x . . . . . . . . . . . . . . . . Indicates that a mark has been placed, but the mark has been
broken. If possible, Ion will AutoMark the lights.