ETC Ion - Manual (Page 109)

4
Patch 93
Snap Parameters
Certain parameters may not want to be subjected to cue timing. Those parameters can be set to
snap. By default, Ion will snap the parameters listed in the following table:
In the [About] channel patch screen, the snap column shows which parameters for that channel
are currently set to snap.
If you wish to disable any of the default snap parameters or enable snap for parameters that are not
by default enabled, you will need to first create a copy of the fixture profile. In the fixture editor for
the copied profile, change the parameter settings via the Snap Enable/Disable column.
Beam FX Index/
Speed
Effect Library MSpeed Shutter
Camera IR
Image
Enable Negative Shutter Strobe
Clip Directory File Object Directory Strobe
Mechanism
Color Effect File Type Object File Sync Source
Color Index Front/Rear
Projection
Output
Command
Text
Color Mix Generator Page Texture
Control Generic Control Position Blink Timeline
Copy Mod Image
Movement
Speed
Projector Input Timeline Position
Cue Internal Media
Frame
Relay Tracking Object
Dimmer Curve Library Select Transition Speed
Edge Blend
Profile
Macro Shape Transition Time
Effect File Mode Shape Library Transition Type
N o t e : You will need to patch your fixtures to their new fixture type if you change which
parameters are to snap or not.