SkyTrak 6036 Service Manual - Manual (Page 9)

Section 1 Safety Practices
6036/6036T S/N 9B0500 thru 14833 1-3
1.4 EQUIPMENT CONSIDERATIONS (CONT.)
Item What to do Why
Hand Tools Always use the proper tool for the job. Many cuts, abrasions, and/or injuries
are caused by defective or improper
tools.
Always keep tools clean and in good Well maintained tools work better and
working order. may prevent injury.
Always use the Special Service Tools These tools will reduce the work,
recommended. labor and costs.
1.5 GENERAL CONSIDERATIONS
Item What to do Why
Solvents Use only approved cleaning fluids and Certain types of fluid cause damage
solvents that are known to be safe. to components and may cause skin
irritation.
Housekeeping Clean and remove all hazards from the To prevent accidents and injuries.
area.
First Aid Do not overlook any cut, abrasion, or What appears at first to be trivial, could
burn. Have it cleaned and dressed become painful and injurious.
properly.
Make sure you know the location Quick application of first aid procedures.
of the First Aid Box.
Cleanliness Plug all hose ends and connections To prevent dirt and foreign material from
when removing components. Clean entering the system. Dirt and abrasive
exterior of all parts before repairing. dust can reduce the efficiency and
A high pressure or steam cleaner is working life of a component and lead to
recommended. Always wear eye costly replacement. Permanent eye
protection when steam cleaning. damage can be caused if foreign matter
enters the eye.
1.6 OPERATIONAL CONSIDERATIONS
Item What to do Why
Engine Stop the engine if at all possible before To prevent serious injury and/or death.
performing any service.
Dangerous Place a warning sign on forklifts that are To prevent serious injury and/or death.
Start dangerous to start. Disconnect battery
leads if leaving the unit unattended.