SkyTrak 6036 Service Manual - Manual (Page 210)

Section 9 Hydraulic System
9-60 Model 6036/6036T S/N 9B0500 thru 14833
Fig. 9.32 Steering Cylinder Exploded View (New Style)
MA6100
13
1
10
3
7
9
5
8
9
12
11
2
15
14
7
4
6
6
1. Tube
2. Piston
3. Rod
4. Gland
5. Locknut
6. Wiper, Rod
7. Seal, U-Cup
8. O-ring
9. O-ring
10. Seal, Piston
11. Wire Retainer
12. Wear Ring
13. Expander
14. Back-up Ring
KITS
15. Seal Kit, Steering Cylinder
(Includes Items 6 thru 14)
12
11 14
8
12 12
10
13
c. Cleaning
1. Discard all seals and wire retainer. Replace
with a complete new seal kit.
2. Clean all metal parts in an approved cleaning
solvent such as trichlorethylene. Be sure to
carefully clean all cavities and grooves.
d. Inspection, Repair and Replacement
1. Check that rod (3, Fig. 9.32) is straight and
undamaged. If the rod is bent or damaged,
install new rod.
2. Inspect inside of tube (1) for scoring and other
damage. If there is any damage to the tube,
replace it with a new tube.
3. Remove small scratches on inside of the tube
with emery cloth of very fine grit. Use the
emery cloth with a rotary motion.
Flats (New Style Only)