SkyTrak 6036 Service Manual User Manual

Page 331

Section 10.

Electrical System

10-69

Model 6036/6036T S/N 9B0500 thru 14833

Trouble

Probable Cause

Remedy

Reference

Optional Light Circuit—MOMENTARY BRAKE LIGHT (STOP LIGHT) AND SWITCH

Stop and tail light
bulbs fail to light
when brake pedal
is pressed.

Replace stop and tail light
bulb(s).

Replace momentary brake
switch.

See para. 10.9.2

Optional Light Circuit—HEADLIGHT AND REAR WORK LIGHT SWITCH

One headlight or
rear work light is
inoperative or
intermittent.

1. Loose connection.

2. Defective sealed beam

unit.

Secure connections to
headlight including ground
wire (black wire).

Replace sealed beam unit.

See para. 10.9.4

1. Stop and tail light bulb(s)

are burned out.

2. Momentary brake switch is

open when brake pedal is
pressed.

One or more
headlights are
dim.

1. Open ground connection at

headlight.

2. Black wire mislocated in

headlight connector (three
wire, hi-lo connector only).

Repair black wire connection
between sealed beam and
body ground.

Relocate black wire in
connector.

See para. 10.9.4

Momentary brake
bulbs remain ON
when brake pedal
is released.

1. Momentary brake switch is

closed when brake pedal is
released.

2. Short in wiring.

Replace momentary brake
switch.

Remedy cause of short.

See para. 10.9.3

One or more
headlights have a
short life.

Charge circuit problem.

Refer to charge circuit
troubleshooting.

See para. 10.6