Agilent Technologies Agilent E5250A - Manual (Page 45)

Agilent E5250A User’s Guide, Edition 11 2-13
Installation
Installing the E5250A
E5255A Configuration Examples
The following example configurations are described:
• “24-output multiplexer (3-BIAS inputs, 1-IV input, 1 module)”
• “24-output multiplexer (1-BIAS input, 1-IV input, 1 module)”
• “96-output multiplexer (1-BIAS input, 1-IV input, 4 modules)”
24-output multiplexer (3-BIAS inputs, 1-IV input, 1 module)
To make this multiplexer, you need a E5255A. See Figure 2-3 for example setup.
The example uses the SMU INPUT 1 connector as the IV input, and uses 0
Ω
resistors.
Figure 2-3 24-output multiplexer (3-BIAS inputs, 1-IV input, 1 module)
1. Connect the IVin1 cable to the SMU1 input connector on the E5255A.
2. Connect the IVin2 cable to the IVout1 connector.
3. Connect the IVin3 cable to the IVout2 connector.