Agilent Technologies Agilent E5250A - Manual (Page 315)

Agilent E5250A User’s Guide, Edition 11 11-11
Error Messages
E5250A Specific Error Messages
E5250A Channel Related Errors
Error
Number
Error Message and Description
2000 Invalid card number
Wrong card number is specified in card number or channel list
parameter. Make sure card is properly installed in the correct
E5250A slot.
2001 Invalid channel number
Wrong channel number is specified in the channel list. Confirm the
channel number, the card configuration, and the configuration
mode of the E5250A.
2006 Command not supported on this card
Command was used that is not supported by the card.
2009 Too many channels in channel list
Too many channels are specified in the channel list. Maximum
number of channels:
• E5252A: number of cards × 120
• E5255A: number of cards × 48
2011 Empty channel list
No channel list is specified.
2012 Invalid channel range
Wrong channel list is defined. Confirm the syntax of the channel
list, the card configuration, and the configuration mode of the
E5250A.