Agilent Technologies Agilent E5250A - Manual (Page 130)

5-36 Agilent E5250A User’s Guide, Edition 11
Controlling the E5250A
Using Virtual Front Panel Utility
To modify the settings in Current Setup Memory
Select MODIFY SETUP softkey. MEMORY SETUP PANEL appears as shown in
examples in Figure 5-12 to Figure 5-14, and softkeys shown after Figure 5-14
appear.
One setup memory is used for connection data of all installed cards. For Auto
Config mode, settings for all cards are on one MEMORY SETUP PANEL. For
Normal Config mode, each card uses a different MEMORY SETUP PANEL.
Figure 5-12 Memory Setup Panel for the E5252A in Auto Config.
Agilent E5250A Virtual Front Panel Utility
** MEMORY SETUP PANEL **
Current Setup Memory : 1
Comment : MOSFET Vth
Card Number : 0
111111111122222222223333333333444444444
Input 123456789012345678901234567890123456789012345678
IV1 @...............................................
IV2 .@..............................................
IV3 ..@.............................................
IV4 ...@............................................
IV5 ................................................
IV6 ................................................
HF1 ................................................
HF2 ................................................
CV1 ................................................
CV2 ................................................
Use softkeys to move cursor and to change status.