Agilent Technologies Agilent E5250A - Manual (Page 323)

Agilent E5250A User’s Guide, Edition 11 12-5
SCPI Command Summary
[:ROUT]:CLOS:CARD? card_number Returns channel_list of all closed channels for the
specified card. "Closed channel" means an input
port connected to an output port.
card_number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
[:ROUT]:CLOS[:LIST] (@channel_list) Connects input ports to output ports as specified in
channel_list.
channel_list: Channels to close.
[:ROUT]:CLOS[:LIST]? (@channel_list) Returns whether specified channels are closed.
0: channel is open (not connected)
1: channel is closed (connected)
channel_list: Channels to check.
[:ROUT]:CONN:RULE card_number,rule Sets the connection rule for the specified card.
card_number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
rule: FREE: free route, or SROUte: single route
[:ROUT]:CONN:RULE? card_number Returns the connection rule of the specified card:
FREE: free route, SROU: single route
card_number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, 4
[:ROUT]:CONN:SEQ card_number,sequence Specifies the connection sequence mode for the
specified card.
card_number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
sequence:
NSEQ: No-Sequence mode
BBM: Break-Before-Make mode
MBBR: Make-Before-Break mode
Command Description