Agilent Technologies Agilent E5250A - Manual (Page 267)

Agilent E5250A User’s Guide, Edition 11 9-11
Executing Sample Programs
Vth and Capacitance Measurement Program
Modifying the Program
This section explains how to modify the sample program:
• “To change the GPIB Address”
• “To change the header of the measurement result report”
• “To output the measurement report to printer”
• “To execute the 4155/4156 calibration”
• “To save the 4155/4156 measurement data”
• “To change the Vth measurement setup”
• “To change the capacitance measurement setup”
• “To use the VFP data upload library”
To change the GPIB Address
You can EDIT the program to change the following parameters in the
Init_setting subprogram.
To change the header of the measurement result report
You can EDIT to change the following parameters in the Init_setting
subprogram. This is for header of report displayed on the computer. For the display
example, refer to Figure 9-2.
Parameter Description Default
Hpib_sc GPIB select code 7
Ad415x GPIB address for the 4155/4156 17
Ad4284 GPIB address for the 4284A 24
Ad5250 GPIB address for the E5250A 22
Parameter Description Default
Usercomm$ Header comment (title) of the report. "Vth C Meas. Sample Program"
Test_num Initial number for numbering the test
item. If value is 0, the first test item
will be number 1. 0