Agilent Technologies Agilent E5250A - Manual (Page 145)

Agilent E5250A User’s Guide, Edition 11 6-9
Programming the E5250A
Creating a Control Program
Defining Connection Sequence
Following commands are used to specify the Connection Sequence. For details,
refer to “Connection Sequence” on page 5-10.
Example: 100 OUTPUT @Hp5250;":ROUT:CONN:SEQ ALL,BBM"
110 ! Sets all cards to Break-before-Make connection
sequence.
Command Description
:ROUT:CONN:SEQ card_no,NSEQ Connection sequence not specified.
:ROUT:CONN:SEQ card_no,BBM Specifies Break-before-Make
connection sequence.
:ROUT:CONN:SEQ card_no,MBBR Specifies Make-before-Break
connection sequence.