Agilent Technologies Agilent E5250A - Manual (Page 198)

7-30 Agilent E5250A User’s Guide, Edition 11
Command Reference
[:ROUTe]:BIAS[:STATe]?
[:ROUTe]:BIAS[:STATe]?
This query command returns the Bias Mode of the specified card.
Syntax [:ROUTe]:BIAS[:STATe]? card_number
Query response 0 or 1 <^END>
0: Bias Mode is OFF
1: Bias Mode is ON
Example OUTPUT @Hp5250;":ROUT:BIAS:STAT ALL,ON"
OUTPUT @Hp5250;":ROUT:BIAS:STAT? 4"
ENTER @Hp5250;A
In above example, A will be 1.
[:ROUTe]:CLOSe:CARD?
This query command returns channel_list of all closed (connected) channels for the
specified card.
Syntax [:ROUTe]:CLOSe:CARD? card_number
Query response channel_list <^END>
Example OUTPUT @Hp5250;":ROUT:OPEN:CARD ALL"
OUTPUT @Hp5250;":ROUT:CLOS (@10101,10202)"
OUTPUT @Hp5250;":ROUT:CLOS:CARD? 1"
ENTER @Hp5250;A$
A$ will be @10101,10202. For the meaning of channel_list, refer to Chapter 5.
Parameter Explanation
card_number card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Parameter Explanation
card_number card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4