Agilent Technologies Agilent E5250A - Manual (Page 196)

7-28 Agilent E5250A User’s Guide, Edition 11
Command Reference
[:ROUTe]:BIAS:PORT?
[:ROUTe]:BIAS:PORT?
NOTE This command applies only to the E5252A card.
For the E5255A card, the input Bias Port cannot be selected, and is always the
built-in Bias Port.
This query command returns the input Bias Port number for the specified card.
Syntax [:ROUTe]:BIAS:PORT? card_number
Query response port_number <^END>
port_number = 1 to 10
Example OUTPUT @Hp5250;":ROUT:BIAS:PORT ALL,4"
OUTPUT @Hp5250;":ROUT:BIAS:PORT? 1"
ENTER @Hp5250;A
For above example, A will be as follows:
4
Parameter Explanation
card_number card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4