Route]:couple[:state – Agilent Technologies Agilent E5250A User Manual

Page 206

7-38

Agilent E5250A User’s Guide, Edition 11

Command Reference
[:ROUTe]:COUPle[:STATe]?

[:ROUTe]:COUPle[:STATe]?

NOTE

This command applies only to the E5252A card.

The Couple Port function is not available for the E5255A card.

This query command returns the Couple Port Mode of the specified card. For
details, refer to "Couple Ports" in Chapter 5.

Syntax

[:ROUTe]:COUPle[:STATe]? card_number

Query response

0 or 1 <^END>

0 : Couple Port Mode is OFF
1 : Couple Port Mode is ON.

Example

OUTPUT @Hp5250;":ROUT:COUP:STAT ALL,ON"

OUTPUT @Hp5250;":ROUT:COUP:STAT? 2"

ENTER @Hp5250;A
For above example, A will be as follows:

Parameter Explanation

card_number

card number:

For Auto Config mode: 0

For Normal Config mode: 1, 2, 3, or 4