Agilent Technologies Agilent E5250A - Manual (Page 3)

DECLARATION OF CONFORMITY
According to EN ISO/IEC 17050-1:2004
Manufacturer’s Name: Agilent Technologies Singapore (International) Pte. Ltd.
Manufacturer’s Address: No. 1 Yishun Ave 7
SINGAPORE 768923
Singapore
Declares under sole responsibility that the product as originally delivered
Product Name: Low Leakage Switch Mainframe 10x12 Matrix
Switch24(8x3)CH Multiplexer
24(8x3)CH Multiplexer
Model Number: Agilent E5250A
Agilent E5252A
Agilent E5255A
Product Options: This declaration covers all options of the above product(s)
complies with the essential requirements of the following applicable European Directives, and carries
the CE marking accordingly:
Low Voltage Directive (2006/95/EC)
EMC Directive (2004/108/EC)
and conforms with the following product standards
EMC
Standard
IEC 61326-1:2005 / EN 61326-1:2006
CISPR 11:2003 / EN55011:1998+A1:1999+A2 :2002
IEC 61000-4-2:2001 /EN 61000-4-2:1995+A1:1998+A2:2001
IEC 61000-4-3:2002+A1:2002/EN 61000-4-3:2002+A1:2002
IEC 61000-4-4:2004 / EN 61000-4-4:2004
IEC 61000-4-5:2001/EN 61000-4-5:1995+A1:2001
IEC 61000-4-6:2003 / EN 61000-4-6:1996+A1:2001
IEC 61000-4-11:2004 / EN 61000-4-11:2004
Canada: ICES/NMB-001:2004
Australia/New Zealand: AS/NZS CISPR 11:2004
Limit
Group 1 Class A
4 kV CD, 8 kV AD
3 V/m / 80 MHz-1 GHz / 1.4-2 GHz, 1 V/m / 2-2.7 GHz
0.5 kV signal lines, 1 kV power lines
0.5 kV line-line, 1 kV line-ground
3 V, 0.15-80 MHz
0 % for 1/0.5 cycle, 0 % for 250/300 cycles,
70 % for 25/30 cycles
Safety IEC 61010-1:2001 / EN 61010-1:2001
Canada: CAN/CSA-C22.2 No. 1010.1-92, NRTL/C
Supplementary Information:
The product was tested in a typical configuration with Agilent Technologies test systems.
This DoC applies to above-listed products placed on the EU market after:
March 20, 2010
Date Toshiyuki Kawaji
QA Manager
Agilent Technologies
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, 71034 Böblingen, Germany.