Agilent Technologies Agilent E5250A - Manual (Page 200)

7-32 Agilent E5250A User’s Guide, Edition 11
Command Reference
[:ROUTe]:CONNection:RULE
[:ROUTe]:CONNection:RULE
This command sets the connection rule (Free or Single Route) for the specified card.
For details, refer to "Connection Rule" in Chapter 5.
At *RST, all cards are set to FREE.
Syntax [:ROUTe]:CONNection:RULE card_number,rule
Example OUTPUT @Hp5250;":ROUT:CONN:RULE ALL,SROU"
[:ROUTe]:CONNection:RULE?
This query command returns the connection rule of the specified card. For details,
refer to "Connection Rule" in Chapter 5.
Syntax [:ROUTe]:CONNection:RULE? card_number
Query response FREE or SROU <^END>
Example OUTPUT @Hp5250;":ROUT:CONN:RULE ALL,SROU"
OUTPUT @Hp5250;":ROUT:CONN:RULE? 1"
ENTER @Hp5250;A$
In above example, A$ will be SROU.
Parameter Explanation
card_number card number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
rule FREE: free route
SROUte: single route
Parameter Explanation
card_number card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4