Agilent Technologies Agilent E5250A - Manual (Page 291)

Agilent E5250A User’s Guide, Edition 11 9-35
Executing Sample Programs
HCI Measurement Program
Modifying the Program
This section explains how to modify the SP_MUX_M sample program and
PARAM.MES setup file.
• “To change the GPIB address”
• “To change the 4155/4156 setup file used”
• “To change Vtci extraction condition”
• “To change Idlin and Gmmax extraction condition”
• “To change the number of devices”
• “To change the stress times”
• “To change the test limits”
• “To specify the data displayed on the 4155/4156 screen”
• “To change the timing for saving the test data”
To change the GPIB address
To change the GPIB address of the instruments, change the following parameters in
the "GPIB Setup" block.
Parameter Description Default
Hpib_sc 4155/4156 GPIB select code 7
Hpib_addr 4155/4156 GPIB address 17
Swm_sc E5250A GPIB select code 7
Swm_addr E5250A GPIB address 22