Allied Telesis AT-8550 - Manual (Page 82)

Configuring VLANs on the Switch
4-16
config protocol
[add | delete]
{
} ... Configures a protocol filter. Supported
values include:
❑ etype
❑ llc
❑
snap
The variable is a hexadecimal number
between 0 and FFFF that represents either the
Ethernet protocol type (for EtherType), the DSAP/SSAP
combination (for LLC), or the SNAP-encoded Ethernet
protocol type (for SNAP).
config vlan ipaddress
{} Assigns an IP address and an optional mask to the
VLAN.
config vlan add port
{tagged | untagged} Adds one or more ports to a VLAN. You can specify
tagged port(s), untagged port(s). By default, ports are
untagged.
config vlan delete port
{tagged | untagged} Deletes one or more ports from a VLAN.
config vlan protocol
[ | any] Configures a protocol-based VLAN. If the keyword any
is specified, then it becomes the default VLAN. All
packets that cannot be classified into other protocol-
based VLANs are assigned to the default VLAN of that
port.
config vlan qosprofile
Configures a VLAN to use a particular QoS profile.
Dynamic FDB entries associated with the VLAN are
flushed once the change is committed.
config vlan tag Assigns a numerical VLANid. The valid range is from 1
to 4095.
Table 4-2 VLAN Configuration Commands (Continued)
Command Description