Allied Telesis AT-8550 - Manual (Page 165)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
9-11
Redistributing Routes into RIP. Enable or disable the exporting of
static and OSPF-learned routes into the RIP domain, using the
following commands:
enable rip export [static | ospf | ospf-intra
| ospf-inter | ospf-extern1 | ospf-extern2]
cost {} tag {}
disable rip export [ospf | ospf-intra | ospf-
inter | ospf-extern1 | ospf-extern2]
These commands enable or disable the exporting of static and OSPF-
learned routes into the RIP domain. You can choose which types of
OSPF routes are injected, or you can simply choose
ospf, which will
inject all learned OSPF routes regardless of type. The default setting
is disabled.
OSPF Timers and
Authentication
Configuring OSPF timers and authentication on a per-area basis is a
shorthand for applying the timers and authentication to each VLAN
in the area at the time of configuration. If you add more VLANs to the
area, you must configure the timers and authentication for the new
VLANs explicitly.