Allied Telesis AT-8550 - Manual (Page 242)

Boot Option Commands
14-8
save {configuration} {primary |
secondary} Saves the current configuration to nonvolatile
storage. You can specify the primary or secondary
configuration area. If not specified, the
configuration is saved to the primary configuration
area.
upload config [ |
] {every
| cancel} Uploads the current run-time configuration to the
specified TFTP server. If
every is
specified, the switch automatically saves the
configuration to the server once per day, at the
specified time. To cancel automatic upload, use the
cancel option. If no options are specified, the
current configuration is uploaded immediately.
use configuration [primary | secondary] Configures the switch to use a particular
configuration on the next reboot. Options include
the primary configuration area or the secondary
configuration area.
use image [primary | secondary] Configures the switch to use a particular image on
the next reboot.
Table 14-1 Boot Option Commands (Continued)
Command Description