Allied Telesis AT-8550 - Manual (Page 174)

Configuring OSPF
9-20
config ospf [vlan | area |
virtual-link ] timer
Configures the timers for one interface or all
interfaces in the same OSPF area. The following
default, minimum, and maximum values (in
seconds) are used:
❑
retransmission_interval
Default: 5
Minimum: 0
Maximum: 3,600
❑ transmission_delay
Default: 1
Minimum: 0
Maximum: 3,600
❑
hello _interval
Default: 10
Minimum: 1
Maximum: 65,535
❑
dead_interval
Default: 40
Minimum: 1
Maximum: 2,147,483,647
config ospf spf-hold-time {} Configures the minimum number of seconds
between Shortest Path First (SPF) recalculations.
The default setting is 3 seconds.
Table 9-5 OSPF Configuration Commands (Continued)
Command Description