Allied Telesis AT-8550 - Manual (Page 207)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
11-15
Resetting and Disabling IPX
To return IPX settings to their defaults and disable IPX functions, use
the commands listed in
Table 11-7 .
Table 11-7 IPX Reset and Disable Commands
Command Description
disable type20 forwarding {vlan } Disables the forwarding of IPX type 20 packets.
disable ipxrip Disables IPX/RIP on the router.
disable ipxsap Disables IPX/SAP on the router.
disable ipxsap gns-reply {vlan } Disables GNS reply on one or all IPX interfaces.
unconfig vlan xnetid Removes the IPX NetID of a VLAN.
unconfig ipxrip {vlan } Resets the IPX/RIP settings on one or all VLANs to
the default. Removes import and export filters,
and resets the MTU size, update interval, and
inter-packet delay.
unconfig ipxsap {vlan } Resets the IPX/SAP settings on one or all VLANs to
the default. Removes import and export filters,
and resets the MTU size, update interval, and
inter-packet delay.