Disabling and resetting stp, Disabling and resetting stp -11 – Allied Telesis AT-8550 User Manual
Page 105
AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
6-11
Disabling and Resetting STP
To disable STP or return STP settings to their defaults, use the
commands listed in
.
Table 6-2 STP Disable and Reset Commands
Command
Description
delete stpd
Removes an STPD. An STPD can only be removed if all VLANs
have been deleted from it. The default STPD, s0, cannot be
deleted.
disable stpd [
Disables the STP mechanism on a particular STPD, or for all
STPDs.
disable stpd port
Disables STP on one or more ports. Disabling STP on one or
more ports puts those ports in forwarding state; all BPDUs
received on those ports will be disregarded.
unconfig stpd {
Restores default STP values to a particular STPD or to all
STPDs.