Allied Telesis AT-8550 - Manual (Page 254)

Index
Index-2
configuration
primary and secondary 14-3
saving changes 14-3
uploading to file 14-4
configuration example 1-6
D
default
passwords 2-11
settings 1-8
users 2-11
default STP domain 6-3
default VLAN 4-14
deleting a session 2-17
DHCP and UDP-Forwarding 8-14
DHCP relay, configuring 8-13
disabling a switch port 3-2
disabling route advertising (RIP) 9-4
disabling Telnet 2-18
disconnecting a Telnet session 2-17
Distance Vector Multicast Routing Protocol. See
DVMRP
distance-vector protocol, description 9-2
DNS
configuration commands (table) 2-20
description 2-20
Domain Name Service. See DNS
domains, Spanning Tree Protocol 6-2
DVMRP
access policies 12-7
configuring 10-5
description 10-2
dynamic entries, FDB 5-1
dynamic routes 8-3, 11-3
E
enabling a switch port 3-2
equal cost multi-path routing (ECMP) 8-4
errors, port 13-4
Events, RMON 13-12
F
FDB
adding an entry 5-2
aging entries 5-1
aging timer and ISQ 7-15
blackhole entries 5-2
clear and delete commands (table) 5-7
configuration commands (table) 5-4
configuring 5-4
contents 5-1
creating a permanent entry example 5-5
displaying 5-6
dynamic entries 5-1
entries 5-1
non-aging entries 5-2
permanent entries 5-2
QoS profile association 5-3
removing entries 5-7
flow control 3-3
Forwarding Database. See FDB
G
GARP VLAN Registration Protocol. See GVRP
Greenwich Mean Time Offsets (table) 2-21
GVRP
configuration commands (table) 4-10
description 4-8
example 4-8
H
history command 2-6
History, RMON 13-12
host configuration commands (table) 2-19
I
ICMP configuration commands (table) 8-20
IEEE 802.1Q 4-5
IGMP
configuration commands (table) 10-7
description 10-3
snooping 10-3
image
downloading 14-1
primary and secondary 14-2
upgrading 14-1
interfaces, router 8-2, 11-1
Internet Group Management Protocol. See
IGMP
Internet Packet Exchange protocol. See IPX
Intra-Subnet QoS. See ISQ
IP address, entering 2-15