Allied Telesis AT-8550 - Manual (Page 104)

Displaying STP Settings
6-10
Displaying STP Settings
To display STP settings, use the following command:
show stpd {}
This command displays the following information:
❑ STPD name
❑ Bridge ID
❑ STPD configuration information
To display the STP state of a port, use the following
command:
show stpd port
This command displays the following:
❑ STPD port configuration
❑ STPD state (Root Bridge, and so on)
❑ STPD port state (forwarding, blocking, and so on)