Appendix a, Supported standards – Allied Telesis AT-8550 User Manual
Page 243
A-1
Appendix A
Supported Standards
The following is a list of software standards supported by the Gigabit
Ethernet switches from Allied Telesyn.
For more information on drafts of the 802.3 MAU MIB + gigabit and
the Ether-like MIB + gigabit, refer to
http://www.ietf.org/html.charters/hubmib-charter.html on the
World Wide Web.
Note
The IEEE Bridge MIB dot1dTpPortEntry PortInDiscards and
dot1dBasePortEntry counters are not incremented.
SNMP
MIB-II (RFC 1213)
IP Forwarding MIB (RFC 1354)
Bridge MIB (RFC 1493)
Evolution of Interfaces MIB (RFC 1573)
RIP2 MIB (RFC 1724)
RMON MIB (RFC 1757)
RMON II Probe Configuration MIB (2021)
802.3 MAU MIB (RFC 2239)
802.3 MAU MIB + gigabit (draft-ietf-hubmib-mau-mib-v2-01)
Ether-like MIB (165)
Ether-like MIB + gigabit (draft-ietf-hubmib-etherif-mib-v2-00)
Terminal Emulation
Telnet (RFC 854)
HTTP 1.0
Protocols Used for
Administration
UDP (RFC 768)
IP (RFC 791)
ICMP (RFC 792)
TCP (RFC 793)
ARP (RFC 826)
TFTP (RFC 783)
BootP (RFC 1271)