Allied Telesis AT-8550 - Manual (Page 178)

Displaying OSPF Settings
9-24
Displaying OSPF Settings
To display settings for OSPF, use the commands listed in Table 9-6 .
Table 9-6 OSPF Show Command
Command Description
show ospf Displays global OSPF information.
show ospf area {} Displays information about a particular OSPF area,
or all OSPF areas.
show ospf interfaces {vlan | area
} Displays information about one or all OSPF
interfaces. If no argument is specified, all OSPF
interfaces are displayed.
show ospf lsdb {detail} area [ |
all] [router | network | summary-net |
summary-asb | as-external | external-
type7 |all] Displays a table of the current LSDB. You can filter
the display using either the area ID, the remote
router ID, or the link-state ID. The default setting is
all with no detail. If detail is specified, each
entry includes complete LSA information.
show ospf virtual-link {
} Displays virtual link information about a particular
router or all routers.