Allied Telesis AT-8550 - Manual (Page 205)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
11-13
The stations connected to the system generate a combination of IP
traffic and IPX traffic. The IP traffic is filtered by the IP VLANs. IPX
traffic is filtered by the IPX VLANs.
In this configuration, all IP traffic from stations connected to ports 1
and 3 have access to the IP router by way of the VLAN Finance. IP
traffic on ports 2 and 4 reach the IP router by way of the VLAN
Personnel.
Similarly, IPX traffic from stations connected to ports 4 and 5 have
access to the IPX router by way of the VLAN Exec. IPX traffic on port 7
reach the IPX router by way of the VLAN Support. Both Exec and
Support use enet_8022 as the encapsulation type.
The IPX configuration shown in example in Figure 11-2 is as follows:
create vlan Exec
create vlan Support
config Exec protocol ipx_8022
config Exec add port 4,5
config Support add port 7
config Exec xnetid 2516 enet_8022
config Support xnetid A2B5 enet_8022