Allied Telesis AT-8550 - Manual (Page 258)

Index
Index-6
Statistics group 13-12
router interfaces 8-2, 11-1
router types, OSPF 9-6
Routing Information Protocol. See RIP
routing table, populating 8-3
routing table, populating IPX 11-3
routing. See IP unicast routing
S
saving configuration changes 14-3
secondary image 14-2
sessions, deleting 2-17
shortcuts, command 2-3
Simple Network Management Protocol. See
SNMP
Simple Network Time Protocol. See SNTP
SNAP protocol 4-13
SNMP
authorized managers 2-26
community strings 2-27
configuration commands (table) 2-27
configuring 2-26
reset and disable commands (table) 2-29
settings, displaying 2-28
supported MIBs 2-26
trap receivers 2-26
using 2-26
SNTP
configuration commands (table) 2-25
configuring 2-21
Daylight Savings Time 2-21
description 2-21
example 2-25
Greenwich Mean Time offset 2-21
Greenwich Mean Time Offsets (table) 2-21
Spanning Tree Protocol. See STP
speed, ports 3-3
split horizon 9-3
static routes 8-3, 11-3
statistics, port 13-3
Statistics, RMON 13-12
status monitoring 13-1
status monitoring commands (table) 13-2
STP
and VLANs 6-2
bridge priority 6-7
configurable parameters 6-7
configuration commands (table) 6-8
configuring 6-7
default domain 6-3
description 1-3
disable and reset commands (table) 6-11
displaying settings 6-10
domains 6-2
examples 6-4
forward delay 6-7
hello time 6-7
max age 6-7
overview 6-1
path cost 6-8
port priority 6-8
port state, displaying 6-10
stub area, OSPF 9-6
Switch
factory defaults 1-8
features 1-1
switch
autonegotiation 3-3
configuring ports 3-1
disabling a port 3-2
enabling a port 3-2
load sharing example 3-8
load sharing group combinations 3-7
load sharing master port 3-6
logging 13-7
monitoring 13-1
port-mirroring, virtual port 3-10
RMON features 13-12
verifying load sharing 3-9
syntax, understanding 2-2
syslog host 13-9
T
tagging, VLAN 4-5
Telnet
disabling 2-18
disconnecting a session 2-17
logging 13-9
using 2-14
TFTP
server 14-1
using 14-4
traceroute command 2-30
transmit errors 13-4