Allied Telesis AT-S70 - Manual (Page 99)

AT-S70 Management Software User’s Guide
99
Displaying OAM Information and Statistics
This section contains the procedures on how to display the OAM
information and statistics on the local module.
Displaying Local
OAM
Information
To display the status on the local OAM, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, shown in Figure 41 on
page 94, is displayed.
2. Select a line card on which you want to configure.
3. Press .
The Module Configuration Menu, shown in Figure 42 on page 95, is
displayed.
4. Select the port that you want to show information of the OAM
operations on.
5. Press .
The Port Management Menu, shown in Figure 43 on page 95, is
displayed.
6. From the Port Management Menu, select OAM Configurations.
The OAM Configuration Menu, shown in Figure 44 on page 96, is
displayed.
7. From the OAM Configuration Menu, select the Show Local OAM
Information Menu.