Allied Telesis AT-S70 User Manual
Page 53
AT-S70 Management Software User’s Guide
53
2. In the Module Status and Configuration Menu, click More ... to display
the remainder of the modules and line cards in the chassis, as shown
in Figure 17.
Figure 17. Module Status and Configuration Menu - 2/2
The Remote Module Status and Configuration Menu displays the fiber
connection between the local chassis and the remote device, as described
below:
Note
This feature only supports the AT-CM Series line cards
(AT-CM202, AT-CM212, etc.), and not the AT-CV Series line cards
(AT-CV10x, AT-CV1KSS, etc.) Therefore, the AT-CV Series line
cards will be displayed as “No Support”.
Module
Displays the name of the module or line card and its slot number.
Card Type
Indicates the type of the remote module the line card is connected to.
Version
Indicates the version of the remote module the line card is connected to.
Link Status (A)
Indicates whether there are any active connections between the port on
the local line card and the remote module connected to it.
More...
Scrolls the screen to show the remaining modules.
3. Press
menu, to save the settings and return to the previous menu.
Module Status and Configuration
Converteon
Module
Card Type
Version
Link Status (Port A)
17: AT-CM202
AT-CM212A/1
V.1.2.0
Online
18: AT-CM202
AT-CM212B/1
V.1.2.0
Online
More ...
Return to Main Menu ...