Allied Telesis AT-S70 - Manual (Page 23)

AT-S70 Management Software User’s Guide
23
To make a selection, refer to “Using the Terminal Interface” on
page 20.
Press or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.
Quitting from a
Local
Management
Session
To end a local management session, return to the Main Menu and type Q
for Quit.
You should always exit from a management session when you are finished
managing a chassis. This can prevent unauthorized individuals from
making changes to the configuration of a chassis would you leave your
management workstation unattended.
Note
You cannot operate both a local management session and a Telnet
management session on the same chassis simultaneously. You
cannot have any number of Telnet sessions running if there is a local
session running.Failure to properly exit from a local or Telnet
management session may block future management sessions.