Configuring oam operations, Figure 41. module status and configuration menu – Allied Telesis AT-S70 User Manual
Page 94
Chapter 8: Operations, Administration, and Maintenance (OAM)
94
Configuring OAM Operations
To configure the OAM operations, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, shown in Figure 41, is
displayed.
Figure 41. Module Status and Configuration Menu
2. Select a line card on which you want to configure.
3. Press
The Module Configuration Menu, shown in Figure 42 on page 95, is
displayed.
Module Status and Configuration
Converteon
Module
Status
Link(A)
Link(B)
OpMode
1: AT-CV5M01
On
Online/100
2: AT-CM202
On
Online/100
Offline
OAM Visible
3: AT-CM202
On
Online/100
Offline
OAM Visible
4: AT-CM202
On
Online/100
Online/10
OAM Visible
5:(Not Inserted)
--
--
--
--
6: AT-CM212A/1
On
Online/100
Online/100
Link Test
7: AT-CM212A/1
On
Online/100
Offline
Link Test
8: AT-CM212B/1
On
Online/100
Online/100
SML
9: AT-CM212B/1
On
Online/100
Online/100
SML
10:(Not Inserted)
--
--
--
--
11: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
12: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
13: AT-CV1KSS
On
Online/1000
Offline
Link Test
14: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
15:(Not Inserted)
--
--
--
--
16: AT-CV102
On
Online/100
Online/1000
Link Test
More ...
Return to Main Menu ...