Allied Telesis AT-S70 - Manual (Page 100)

Chapter 8: Operations, Administration, and Maintenance (OAM)
100
The Show Local OAM Information Menu, shown in Figure 46, is
displayed.
Figure 46. Show Local OAM Information Menu
For more information on the OAMPDU types, refer to “OAMPDU
Types” on page 92.
The Show Local OAM Information Menu items and options are
described below:
Line Card Operation Mode
Indicates whether the selected port is configuring as OAM visible or
bypass mode.
ˆ OAM Bypass Mode – In this mode, the line card receives
OAMPDU packets, but forwards them onto the other port. This
allows Converteon™ to be used in a network where the
Show Local OAM Information
Module 4, Port A
Line Card Operation Mode OAM Visible Mode
Operation Status Operational
Mux State Forward
Parser State Forward
Local Discovering Yes
Local Stable No
Remote Discovering No
Remote Stable No
Critical Event No
Dying Gasp No
Link Fault No
OAM Version 0x01
Config Revision 0x0000
Vendor Information 0x00160001
Vendor OUI 00-30-84
Loopback State None
In Loopback Test No
Return to OAM Configurations ...