Allied Telesis AT-S70 - Manual (Page 105)

AT-S70 Management Software User’s Guide
105
The Show Remote OAM Information Menu, shown in Figure 47, is
displayed.
Figure 47. Show Remote OAM Information Menu
Displaying OAM
Statistics
To display the OAM statistics, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, shown in Figure 41 on
page 94, is displayed.
2. Select a line card on which you want to configure.
3. Press .
The Module Configuration Menu, shown in Figure 42 on page 95, is
displayed.
4. Select the port that you want to configure the OAM operations on.
5. Press .
The Port Management Menu, shown in Figure 43 on page 95, is
displayed.
Show Remote OAM Information
Module = 5, Port = 1
MAC Address 00:0c:46:9a:21:c9 Mux State Forward
Parser State Forward Local Discovering Yes
Local Stable No Remote Discovering No
Remote Stable No Critical Event No
Dying Gasp No Link Fault No
OAM Version 0x01 Config Revision 0x0003
Vendor Info 0x00160001 Vendor OUI 00-30-84
Mode Active Max OAMPDU Size 1518
Loopback Support Yes Event Support No
Variable Support Yes Unidirect Support Yes
Return to OAM Configurations ...