Allied Telesis AT-S70 - Manual (Page 102)

Chapter 8: Operations, Administration, and Maintenance (OAM)
102
ˆ Loopback – Parser passes received non-OAMPDUs to Multiplexer
during remote loopback test.
ˆ Discard – Parser discards received non-OAMPDUs.
Local Discovering
Indicates the local station can accept or reject the configuration of the
peer OAM entity.
ˆ Yes – Local station accepts the configuration of the peer OAM
entity. (default)
ˆ No – Local station rejects the configuration of the peer OAM entity.
Local Stable
Indicates local OAM Client acknowledgement of and satisfaction with
remote OAM state information.
ˆ Yes – Indicates that the selected port has seen and is satisfied with
remote state information.
ˆ No – Indicates that the selected port either has not seen or is not
satisfied with remote state information. (default)
Remote Discovering
Indicates the remote station can accept or reject the configuration of
the peer OAM entity.
ˆ Yes – Remote station accepts the configuration of the peer OAM
entity.
ˆ No – Remote station rejects the configuration of the peer OAM
entity. (default)
Remote Stable
Indicates remote OAM Client acknowledgment of and satisfaction with
local OAM state information. Possible values are:
ˆ Yes – Indicates that the selected port has seen and is satisfied with
local state information.
ˆ No – Indicates that the selected port either has not seen or is not
satisfied with local state information. (default)
Critical Event
Indicates a severe error condition that does not result in a complete
reset or reboot by the peer entity.
ˆ Yes – A severe error condition has occurred.
ˆ No – No severe error condition has occurred. (default)
Dying Gasp
Indicates an unrecoverable failure condition has occurred when an
equipment is about to be reset, reboot, or otherwise having a power
failure.