Allied Telesis AT-S70 - Manual (Page 32)

Chapter 3: AT-S70 Management Security Features
32
2. From the System Configuration Menu, select Omega Options.
The Omega Options Menu, shown in Figure 4 on page 29, is
displayed.
3. Adjust the settings as required.
The management access methods are described below:
> Local Omega Enabled
Disabled Local Omega
These two selections allow you to control whether the Omega
interface can be accessed by connecting a terminal or PC to the
RS-232 port on the management module. This is referred to as
accessing the program locally. The default for this access method is
enabled.
> Remote Omega Enabled
No Remote Omega
Accessing Omega remotely is accomplished with the Telnet program
or an SNMP management program, such as HP Openview. The
default for this access method is enabled.
4. Press or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.