Allied Telesis AT-S70 User Manual
Page 51
AT-S70 Management Software User’s Guide
51
2. In the Module Status and Configuration Menu, click More ... to display
the remainder of the modules and line cards in the chassis, as shown
in Figure 15.
Figure 15. Module Status and Configuration Menu - 2/2
The Module Status and Configuration Menu displays basic information on
all the components currently installed in the chassis, including:
Line cards or CPM card (slots 1 through 18)
LED interface card (slot 19)
Rear expansion slot (slot 20)
Primary and redundant power supplies (slots 21 and 22)
The basic information displayed on the installed component is:
Module
Displays the name of the module or line card and its slot number.
Status
Indicates the status of the module or line card.
Link (A) and Link (B)
Indicates whether there are any active connections between a port and the
device connected to the port. Online indicates that there is a link while
Offline indicates that there is no link.
More...
Scrolls the screen to show the remaining modules.
3. Press
menu, to save the settings and return to the previous menu.
Module Status and Configuration
Converteon
Module
Status
Link(A)
Link(B)
OpMode
17: AT-CM202
On
Online/100 Offline
OAM Visible
18: AT-CM202
On
Online/100 Online/100 Link Test
19: LED
On
--
--
20:(Not Inserted)
--
--
--
21: RPSA
On
22: RPSB
On
More ...
Return to Main Menu ...